2011

Click Analyze tab ➤ Drawing Object panel ➤ Network Analysis.
When you choose points, AutoCAD Map 3D locates the closest node to the
point you select.
■ Shortest path — Specify a starting point and ending point.
■ Best route — Specify a starting point and one or more visit points.
■ Flood trace — Specify a start point only.
Start Point
Select a start point. Click Select Point to select a point in the map. Press
Enter to return to this dialog box. All three forms of network analysis require
a start point.
Visit Point
Select one or more visit points for best route analysis. Click Select Point to
select points in the map. While in the map, click a point to select it. Accept
the point, cancel the selected point, or select additional points:
■ To accept the point and return to the dialog box, press Enter, or
right-click and click Enter.
■ To discard the point and return to the dialog box, press ESC, or right-click
and click Cancel.
■ To accept the point and specify another point, right-click. Click Next
Point.
End Point
Selects an end point for a shortest path analysis. Click Select Point to select
a point in the map. Press Enter to return to this dialog box.
List of Locations
The points you specify are displayed in the list.
■ To see the location of a point in the map, select the coordinates in the
list. Click Preview.
■ To remove a point from the list, select the coordinates. Click Delete.
Load
Use settings that you previously saved.
Network Topology Analysis - Choose Locations dialog box | 1979