2011

Click Analyze tab ➤ Drawing Object panel ➤ Load Topology.
Topology Location options
Select whether to load a topology that is in a source drawing or in the
current drawing.
Name
Select the topology to load. If the list does not display the topology you
want, be sure you have selected the correct in the Topology Location area.
The list of topology names comes from the object data tables. These tables
may exist in the current drawing but the topology objects may only exist
in the source drawings.
Type
Displays the type of the selected topology.
Description
Displays the description of the selected topology.
Create Topology Objects When Loaded
If the selected topology is from a source drawing, select this check box to
copy the topology objects into the current drawing as the topology is loaded.
If this option is not selected, the objects are loaded but are not copied into
the current drawing.
Select Topology Objects For Save Back
Select this option to add objects in the current drawing to the save back set
if they are referenced by the selected topology.
Audit Geometry Of Topology Objects
Select this option to verify that objects for the selected topology are
geometrically correct. Any objects that are not correct are highlighted.
Complete Existing Topology Objects
If the selected topology is from the current drawing, select this option to
complete any incomplete objects in the topology.
Use this option to ensure that the objects in the current drawing are available
for topology editing. Map queries all the objects from the source drawings
that are required to create a self-contained subset of the topology objects.
Load Topology dialog box | 1977