2011

WARNING This command will not be supported in future releases. This is the
old command for editing geometry, direction, and resistance in a topology. There
are several new commands for editing topologies, such as MAPAN, MAPDL,
MAPMP. For a complete list, see
Editing Topologies (page 851).
Use this dialog box to modify objects in a topology without damaging the
topology relationship data. If you modified objects using standard editing
commands, use the Update option to correct the topology relationship data
for that object.
To edit a topology (page 854)
Topology Name area
Select a topology from the list of loaded topologies. When you modify the
selected object, the topology data for that object will be updated in the
selected topology.
NOTE If the object is referenced by more than one topology, you will need to
use the update option to modify the other topologies.
If the topology you want is not loaded, click Load.
Object Type
Select the object type to edit. Object options are unavailable if they do not
match the topology type you are choosing.
Edit Operation
Specify the edit operation to perform on the selected object type.
Click OK to perform the specified operation and make your selections.
To cancel the topology edit operation, click Close.
Node ObjectsPolygon ObjectsLink Objects
MAPNODEDIT (Edit Topology
Node command) (page 1946)
MAPPOLYDEL (Delete Topology
Polygon command) (page 1949)
MAPLINKEDIT (Edit Topology Link
command) (page 1943)
MAPNODADD (Add Topology
Node command) (page 1944)
MAPPOLYADD (Add Topology
Polygon command) (page 1948)
MAPLINKADD (Add Topology Link
command) (page 1941)
MAPNODINS (Insert Topology
Node command) (page 1947)
MAPPOLYUPD (Update Topo-
logy Polygon command) (page
1949)
MAPLINKDEL (Delete Topology
Link command) (page 1942)
1974 | Chapter 38 Topology Dialog Boxes