2011

Highlight Errors
Highlight errors in red (nodes or centroids are highlighted with a red X).
To remove the highlighting, use the REDRAW, REGEN, or SAVE command.
Mark Errors With Blocks
Mark errors with blocks of the shape and color you specify below. To remove
a marker block, select it and then press Delete.
Marker Size
Specify the marker size as a percent of the screen size. A value between 3%
and 7% is usually suitable.
Missing Centroids
Mark each area with a missing centroid with a block of the shape and color
you specify. This option is disabled if you selected the Create Missing
Centroids option on the previous dialog box.
Intersections
Mark each duplicate object with a block of the shape and color you specify.
Duplicate Centroids
Select the check box to mark each area in the drawing with more than one
centroid. If you don't select the check box, AutoCAD Map 3D creates a
topology even if an area contains more than one point object which qualifies
to be a centroid. The topology data is added to only one of the centroid
objects.
Incomplete Areas
Select the check box to detect links that are not part of a closed area. If you
don't select this option, AutoCAD Map 3D ignores links that are not part
of a closed area and they do not receive any topology data.
Highlight Sliver Polygons
Select the check box to check for sliver polygons and mark their centroids
with red Xs. Sliver polygons are long, thin polygons, which can occur if
data is digitized or drawn inaccurately. Map will create your topology
regardless of the sliver polygons, but you should check that your data is
accurate.
Cancel
Close the dialog box without creating the topology.
Back
Display the previous dialog box in the list.
1968 | Chapter 38 Topology Dialog Boxes