2011

Select node to update:
Use any selection method to select the object to edit.
Specify new insertion point:
Enter the coordinates of a point or select a point onscreen. If a node already
exists in the new location, you are prompted to delete one of the nodes.
The node is moved to the new location, and all associated links move their
endpoints.
MAPNODINS (Insert Topology Node command)
NOTE This functionality applies only to drawing objects.
WARNING This command will not be supported in future releases. This is the
old command for inserting a node in a topology. The new command is MAPIN.
Use this command to insert a node on an existing link while maintaining the
integrity of the topology information.
To create a node on an existing link (page 878)
MAPIN
Respond to the prompts:
Enter topology name (? for list) <toponame>:
Enter the name of the topology to modify. To display a list of all loaded
topologies, enter ?.
Specify insertion point:
Enter the coordinates of a point or select a point on the screen. If any block
definitions exist in the drawing, you are prompted for a block to reference.
The default block name is the last block name referenced in the drawing.
To add a node at the end of a dangling link, or to add a node not on a link,
use the
MAPNODADD (Add Topology Node command) (page 1944) command.
MAPNODINS (Insert Topology Node command) | 1947