2011

Input Units Settings
Set the units for coordinate geometry input. Linear Units
are US Feet,
International Feet, Meters, or Chains. Angle Formats
are Decimal Degrees,
Degrees/Minutes/Seconds, Grads, Radians, and Surveyor’s Units.
Azimuth Measurements
Define Bearings Relative T
o North Select this option if bearings in
your map are relative to North.
Define Bearings Relative to South Select this option if bearings in your
map are relative to South. This is most often the case for maps of the
southern hemisphere.
Create Text Log
When you select this option, AutoCAD Map 3D writes the content of the
COGO Input dialog box (page 1668) to the AutoCAD Text Window when you
create a point using that dialog box.
Define/Modify Drawing Set dialog box
Use this dialog to define or modify the drawing set for the current drawing.
Attach drawings that you will use with the current drawing. Activate only
those drawings you want to search for the current query.
To attach drawings (page 158)
Click Home tab ➤ Data panel ➤ ➤ Define Drawing Set.
NOTE These options affect drawing objects only. For information about filtering
geospatial feature data, see
Filtering Features When You Add Them to a Map (page
309).
In addition, you can change drawing settings such as description, simple
transformation, or save back extents.
AutoCAD Map 3D stores the changes you make to the drawing set with the
current drawing. The next time you open this drawing, your new settings will
be in effect.
Attached Drawings list
View all drawings attached to the current drawing.
1918 | Chapter 37 Setting Map Options Dialog Boxes