2011

Filter Point Cloud dialog box
Use the Filter Point Cloud dialog box to filter your LiDAR or point cloud data
by classification, elevation, intensity, or location on your map.
To filter point cloud dataIn the Display Manager, right-click a point cloud layer
and select Filter ... (page 1025)
Click Create tab ➤ Point Cloud panel ➤ Create Index
Filter By Select a filter type from the drop-down list. You can filter by
classification, elevation, intensity, or location on your map.
Define Filter Define the filter to apply to your data:
■ Classification: select the classified values you want to include in your data.
Shift-click or control-click to select multiple values.
■ Elevation: type the elevation ranges you want to display in your map. Use
hyphens to define ranges and commas to separate them; for example,
150-200, 350-400, 1200-2000.
■ Intensity: filter data based on LiDAR intensity values. Use hyphens to
define ranges and commas to separate them; for example, 0.25-2.00,
3.50-4.00, 120.00-200.00.
■ Spatial: Click the Locate on Map button to create a spatial filter. You can
create a spatial filter based on a circle, rectangle, polygon, or proximity to
an object on your map.
Clear Filter Clear the values for the filter that you have applied.
Apply Filter Apply the filter you have defined to your data.
Cancel Cancel the filter operation and closes the Filter Point Cloud dialog
box.
1900 | Chapter 36 Survey Dialog Boxes