2011

List of images
View each image you inserted into the drawing. Selected images are
highlighted. Click an image name to select or deselect it.
Select All
Click to select all the images in your drawing.
Select None
Click to remove all selected images from the selection set.
Insert Image dialog box
Use this dialog box to insert raster images whose formats are not supported
by Data Connect (page 437)
To insert a raster image (page 460)
Click Home tab ➤ Data panel ➤ Insert An Image.
Select one or more images to insert into a drawing. You can view information
about an image and preview the image before you insert it.
NOTE If the FILEDIA variable is set to 0, then this dialog box is not displayed and
you can type the name of the image to insert on the command line.
Look In
Select the drive and folder that contains the image.
File Name
Type or select the name of the image or images to insert.
Files Of Type
From the list of available image formats, select the type of file to display in
the list.
Show Frame(s) Only
Select this option to insert only a frame placeholder for the image. The
image is not loaded into memory and not displayed. This is useful if you
are inserting a group of images and don't want to wait for each image to
1878 | Chapter 34 Raster Image Dialog Boxes