2011

If the polygon has internal boundaries, your split line must not cross one of
the internal boundaries, nor can it touch one of the vertices of an internal
boundary.
This split is not allowed because
it touches one of the vertices of
the internal boundary.
This split is not allowed because it
crosses an internal boundary.
This split is allowed.
You can choose to copy data from the original mpolygon to the two new
mpolygons, or you can delete the data.
Respond to the prompts:
Select the mpolygon to split:
Use any object selection method.
Would you like to Draw or Select the line for split? [Draw/Select]:
Enter the letter of the option you want.
Draw
Enter d to draw the line. Respond to the prompts:
Specify start point or [eXit] <eXit>:
Select the starting point for the divider line.
Specify next point or [Arc/Undo]:
Do one of the following:
■ Select the next point for the divider line.
■ Enter a to draw an arc. For more information on drawing arcs, see the
AutoCAD help.
■ Enter u to undo the last action.
When you finish drawing the line, press Enter.
1822 | Chapter 31 Polygon Object Dialog Boxes