2011

See also:
■ Overview of Attaching Drawings (page 154)
■ Viewing Information about Attached Drawings (page 171)
■ Viewing Objects in the Save Set (page 752)
■ Modifying Attached Drawing Settings (page 163)
NOTE To attach a geospatial feature source to the current drawing and bring in
its features, use Data Connect. See
Overview of Bringing In GIS Features (page
305).
To attach drawings
■ Drag the file from Windows Explorer to the Map Explorer tab of the Task
Pane.
- or -
1 Open the drawing to which you want to attach another drawing.
2 In the Tool-based Ribbon Workspace, click Home tab ➤ Data panel ➤
Define Drawing Set.
To specify separate filters for file names and for descriptions, click Filter
and use the
Drawing Set Display Filter dialog box (page 1922).
To change the drawing description, specify simple transformation settings,
or define save back extents, click Drawing Settings and use the
Drawing
Settings dialog box
(page 1923).
3 In the
Define/Modify Drawing Set dialog box (page 1918), click Attach.
4 In the Select Drawings to Attach dialog box, select the drawings to attach.
Click Add.
To modify the settings for attached drawings, such as the offset, scale, or save
back extents, see Modifying Attached Drawing Settings (page 163).
For information on viewing the attached drawings, see
Viewing All Objects
in Selected Attached Drawings
(page 745).
158 | Chapter 2 Setting Up