2011

Use Data
Resolve all conflicts using the Data Input Field definitions.
OK
Accept the current settings and return to the Import dialog box.
Coordinate System Translation dialog box
This dialog box was used to convert the file from one coordinate system to
another. It has been discontinued. Instead, use one of the following procedures
or commands.
To export drawing objects to MicroStation Design (DGN) (page 1438)
To export to MapInfo MIF/MID (page 1432)
To export drawing objects to SHP (page 1428)
To export drawing objects to ESRI Arc/INFO (page 1421)
In the Tool-based Ribbon Workspace, click Output tab ➤ Map Data Transfer
panel ➤ Map 3D Export.
If the coordinate system you want is not listed in any category, you can create
a new coordinate system
(page 90).
Input Settings area
From the Coordinate System list, select the coordinate system code for the
existing file. This list displays all codes in the selected category. To display
the codes for a different category, select the new category from the Category
list.
Output Settings area
From the Coordinate System list, select the coordinate system code you
want for the new file. This list displays all codes in the selected category.
To display the codes for a different category, select the new category from
the Category list.
Coordinate System Translation dialog box | 1703