2011

After
Boundaries
Specify what to use as the boundary.
Use Save Back Extents Of Active Source Drawings
Use the save back extents specified by the drawing settings for the current
drawing. To change the save back extents, use the Drawing Settings dialog
box.
In Map Explorer, right-click Drawings ➤ Define/Modify Drawing Set. In
the
Define/Modify Drawing Set dialog box (page 1918), click Drawing Settings.
Select Boundaries
Use existing objects as the boundary. Click Select to select the objects to
use.
Define Boundary
Use selected points to specify the boundary. Click Define to select points
to delineate the boundary.
Objects to Break
Select the objects to break.
Select Automatically
Use all objects within or crossing the boundary.
Select Manually
Use only selected objects. Click Select to select the objects to break.
Filter Selected Objects
Select only objects that are on the specified layers or blocks. These filters
are used for both automatic and manual selection of objects.
Filter On Layers
Break only objects on the selected layers. Click Layers to select from a list
of all available layers in the current drawing.
Break Method
Select the objects to skip or object data to retain during a break operation.
Break Objects at Boundary dialog box | 1667