2011

Open
Removes the closing segment of the polyline. The polyline is considered closed
unless you open it using the Open option. If the LineString is open the first
option is Closed.
Join
Joins two open LineStrings into one. The ends must be touching.
Select objects:
Select the two LineStrings to be joined.
Edit Vertex
Marks the first vertex of the LineString by drawing an X on the screen. If you
have specified a tangent direction for this vertex, an arrow is also drawn in
that direction.
Next/Previous/Insert/Move/eXit] <Next>:
Enter an option. For more information about the prompts, see PEDIT.
Undo
Reverses operations as far back as the beginning of the edit session.
Exit
Ends the MAPLINESTRINGEDIT command.
MAPMULTILINESTRINGCREATE
Use this command to create a new MultiLineString feature on a layer that
contains line feature data. A MultiLineString is a set of LineStrings that behave
as one feature. When you complete the first LineString you are prompted to
begin another one until you have created the set.
To create a new LineString or MultiLineString feature (page 691)
NOTE This command is for geospatial features only. To create linear drawing
objects, see
Overview of Working with Drawing Objects (page 727).
The MAPMULTILINESTRINGCREATE command is based on the PLINE
command. For more information about the prompts, see PLINE.
Respond to the prompts:
1656 | Chapter 23 Editing Maps Dialog Boxes