2011

Size Context
Select Device Space to specify label widths and heights in screen units.
Available units are Points, Inches, Millimeters, or Centimeters.
Select Map Space to specify label widths and heights in Mapping Coordinate
System (MCS) units. Available units are Inches, Feet, Yards, Miles,
Millimeters, Centimeters, Meters, and Kilometers.
Units
Select the type of units to use.
Width
Enter the symbol width or specify the width using an expression. For more
information, see
Using the Expression Builder (page 1555).
Height
Enter the symbol height or specify the height using an expression. For more
information, see
Using the Expression Builder (page 1555).
Maintain Aspect Ratio checkbox
To maintain width-to-height proportions when you change the width or
height of the symbol, select the Maintain Aspect Ratio checkbox.
Fill Color
To override the fill color of the symbol, select a color. If you do not specify
an override, the default fill color from the symbol is used.
Edge Color
To override the edge color of the symbol, select a color. If you do not specify
an override, the default edge color from the symbol is used.
Rotation
Do one of the following:
■ Enter the amount to rotate the text.
■ Click Any Angle. Specify the angle using the slider or enter an angle in
the box. Click OK.
■ Click Expression. Specify the rotation using an expression. For more
information, see
Using the Expression Builder (page 1555).
1638 | Chapter 22 Display Manager Dialog Boxes