2011

Source Drawings
Select the attached drawings, then enter the code for these drawings. Click
Select Coordinate System to select from a list of available coordinate systems.
To assign a different code to other source drawings, use this command again.
You cannot assign a coordinate system to a source drawing if that drawing
currently has queried objects in the current drawing.
NOTE For information on using custom coordinate systems you defined in a
previous release of AutoCAD Map 3D, look up “coordinate systems, updating” in
the help index.
Coordinate system transformations may not work as expected on raster objects.
Select Drawings to Assign Coordinate System dialog box
Use this dialog box to select the file names of drawings to which you want to
attach the coordinate system.
To assign a coordinate system to a source drawing (page 146)
Click Map Setup tab ➤ Coordinate System panel ➤ Assign.
NOTE This functionality is for drawing files only. To assign a coordinate system
to geospatial feature sources to which you are connecting, see
Changing
Coordinate Systems
(page 311).
Look In
Select a drive alias from the list. AutoCAD Map 3D creates a drive alias for
drive C. You must create drive aliases for all other drives that you use.
Create/Edit Aliases
If the drive or folder you want is not listed, click to define a new drive alias.
Preview
Click to display a preview of the selected drawing. If a drawing is locked,
the Preview window is blank.
Select Drawings to Assign Coordinate System dialog box | 1599