2011

■ .PERIMETER — The value of the PERIMETER object data field for each
polygon.
The Process Sub-Objects option in the Output Report Options dialog box
specifies the objects in a report.
Reported Data
Do not Process Sub-ObjectsProcess Sub-ObjectsTopology Type
NodesNodes, objects, and object dataNode
LinksLinks, start and end node dataNetwork
CentroidsCentroids, links, and nodesPolygon
To query a topology
1 In
Map Explorer (page 2068), under Current Drawing, right-click a topology
➤ Analysis ➤ Topology Query.
2 In the
Topology Query dialog box (page 2008), select the topology to query.
If the topology is not on the list, click Load and select the topology to
use.
3 Under Result Topology, specify how to save the results of the query:
■ None — Objects are retrieved into the current drawing, but no
topology data is created.
■ Temporary — Objects are retrieved into the current drawing, and the
topology data is loaded into memory. This data is not saved to the
objects.
■ Permanent — Objects are retrieved into the current drawing, and a
new topology is created.
If you create a temporary or permanent topology, specify a name and
description for the topology.
4 To load an existing query, click Load Query and select the query.
To define a new query, click Define Query Of Attached Drawings and
define the conditions for the query.
To close the dialog box, but have AutoCAD Map 3D remember your
selections, click OK.
Querying a Topology | 1353