2011

You are prompted to enter a number, specify a distance, or select text. Select
all the distances you want to add. You can select numeric text in your drawing,
click the start and end points of the distance you want to measure, or enter
the number directly on the command line. When you press Enter, AutoCAD
Map 3D displays the total of all the distances.
See also:
■
Measuring and Tracking Coordinates (page 1147)
■ Setting Coordinate Geometry Options (page 233)
■ Overview of Coordinate Systems (page 143)
■ Displaying Continuous Distance (page 1158)
To add distances
1 Click Analyze tab ➤ Inquiry panel ➤ Add Distances.
2 Specify the first distance by doing one of the following:
■ Enter the distance on the command line.
■ Select two locations in the map.
■ Enter s. Select numeric text in the map, such as a measurement.
3 Enter as many additional distances as you want.
4 When you finish selecting distances, press Enter to view the total of the
distances.
The results of the calculation are displayed on the command line. If you
do not see the command line, press Ctrl + 9 to display it.
Measuring Coordinate Geometry | 1157