2011

2 In the Polygon Fill Properties dialog box (page 1824), select the polygon
fill properties.
Do this in the Polygon Fill Properties dialog box...To fill with...
Solid
■ Click the Hatch tab.
■ For Pattern Type, select Predefined.
■ For Pattern Name, select Solid.
■ For Fill Color, select the fill color. Click Select Color to
select from a large palette of colors.
Predefined hatch pattern
■ Click the Hatch tab.
■ For Pattern Type, select Predefined.
■ For Pattern Name, select a pattern.
User defined hatch pattern
■ Click the Hatch tab.
■ For Pattern Type, select User Defined.
■ Specify the angle and spacing of the hatch pattern.
One or two color gradient
■ Click the Gradient tab.
■ Select the number of colors to use for your gradient
fill.
■ Select the colors.
■ Use the Shade/Tint slider to adjust the color.
■ Click a pattern.
■ Select Center to create a symmetrical fill, or clear
Center to move the "highlight" up and to the left.
■ Specify an angle for the "highlighted" area.
All polygons you create or convert will use the new default fill. You can change
the fill for an existing polygon with
MAPMPEDIT (Edit Polygon command)
(page 1818).
To change the display of polygon edges
1 On the command line, enter polydisplay.
Working with Polygon Objects | 979