2012

NOTE Even though you will not make any changes in the Customize dialog
box in this procedure, it must be displayed when you add command tools
to a tool palette.
3 In the program, drag a command (button) from a toolbar to the tool
palette and, without releasing the button on the pointing device, move
the cursor to the place on the tool palette where you want the tool.
A horizontal line appears to indicate where the tool will be located.
4 Release the button on the pointing device.
5 In the Customize dialog box, click Close.
To create a command tool from the Customize User Interface (CUI) Editor
1 Click Manage tab ➤ Customization panel ➤ User Interface.
If the CUI Editor is covering the Tool Palettes window, then move the
CUI Editor to the side.
2 In the Command List pane, drag a command to the tool palette and,
without releasing the button on the pointing device, move the cursor to
the place on the tool palette where you want the tool.
A horizontal line appears to indicate where the tool will be located.
3 Release the button on the pointing device.
4 In the CUI Editor, click Close.
To create a command tool that executes a custom command sequence
(Advanced)
1 Click Manage tab ➤ Customization panel ➤ Tool Palettes.
2 In the program, drag a command from a toolbar to the tool palette and,
without releasing the button on the pointing device, move the cursor to
the place on the tool palette where you want the tool.
3 Release the button on the pointing device.
4 On the tool palette, right-click the tool. Click Properties.
Create and Use Command Tools | 63