2012

For information about temporarily relaxing constraints, see Overview of
Constraints
on page 713.
To grip-edit constrained geometry
1 Select the constrained object.
2 Click the grips and drag it to edit the geometry.
To turn a constraint off
1 Click the constrained object to select it.
2 Move your mouse over a grip.
The grips are displayed in red to show that the object is selected.
3 Click the grip.
4 Press and release the Shift key.
5 Move the object. The object moves freely as it is no longer constrained.
Constraint bars will no longer be displayed (if enabled) for the object, as
the constraints are turned off.
To delete a geometric constraint
1 Select a constrained object.
2 Ensure that the constraint bar is visible for the selected object.
3 Right-click the constraint bar. Click Delete.
Constraint bars for the deleted constraint will no longer display for the
object.
To delete all geometric constraints from an object
1 Select a constrained object.
2 Click Parametric tab ➤ Manage panel ➤ Delete Constraint.
NOTE All geometric and dimensional constraints are removed from the
object.
3 Press Enter.
Modify Objects with Geometric Constraints Applied | 729