2012

NOTE To reduce clutter, Coincident constraints display by default as small,
light-blue squares. You can use an option in the Constraint Settings dialog box to
turn them off if necessary.
To display or hide a geometric constraint
1 Click Parametric tab ➤ Geometric panel ➤ Show/Hide.
2 Select the constrained objects.
3 Press Enter.
4 Select one of following:
■ Show. Displays the geometric constraints.
■ Hide. Hides the geometric constraints.
■ Reset. Displays the geometric constraints and resets the contraint bar
to the default position relative to the parameters they are associated
with.
To display all geometric constraints
➤ Click Parametric tab ➤ Geometric panel ➤ Show All.
To hide all geometric constraints
➤ Click Parametric tab ➤ Geometric panel ➤ Hide All.
To change the constraint bar settings using the constraint bar shortcut menu
1 Select a constrained object.
2 Ensure that the constraint bar is visible for the selected object.
3 Right-click the constraint bar, and click Constraint Bar Settings.
4 In the Constraint Settings dialog box, on the Geometric tab, select or
clear the appropriate check boxes.
726 | Chapter 19 Add Constraints to Geometry