2012

The coordinate values are used as a relative displacement rather than the
location of a base point. The selected objects are moved to a new location
determined by the relative coordinate values you enter.
To move an object from model space to paper space (or vice versa)
1 Click a layout tab.
2 Click Home tab ➤ Modify panel ➤ Change Space.
3 Select one or more objects to move.
4 Press Enter.
The object is moved to the new space, and is scaled appropriately to the
new space.
To move by stretching
1 Click Home tab ➤ Modify panel ➤ Stretch.
2 Select the object by using crossing selection.
The crossing selection must include at least one vertex or endpoint.
Specify crossing selection by clicking, moving your pointing device from
right to left, and clicking again.
3 Do one of the following:
■ Specify the base point for the move, and then specify a second point.
■ Enter the displacement in the form of a Cartesian, polar, cylindrical,
or spherical coordinate value. Do not include the @ sign, because a
relative coordinate is assumed. At the prompt for the second point of
displacement, press Enter.
Any objects with at least one vertex or endpoint included within the
crossing selection are stretched. Any objects that are completely within
the crossing selection are moved without being stretched.
Move or Rotate Objects | 649