2012

2 Select a base grip on an object by clicking the grip.
The selected grip is highlighted, and the default grip mode, Stretch, is
active.
3 Cycle through the grip modes by pressing Enter until the grip mode
Rotate appears.
Alternatively, you can right-click to display shortcut menu modes and
options.
4 Enter c (Copy).
5 Move the pointing device and click.
The rotation snap is the angle between the grip you selected and the
location you specified for the copy.
6 Hold down Ctrl and place additional copies by specifying additional
locations.
These copies are created at the same rotation snap angle as the first copy.
7 Turn off grips by pressing Enter, Spacebar, or Esc.
To mirror objects and retain the originals using grips
1 Select the objects to mirror.
2 Select a base grip on an object by clicking the grip.
The selected grip is highlighted, and the default grip mode, Stretch, is
active.
3 Cycle through the grip modes by pressing Enter until the grip mode
Mirror appears.
Alternatively, you can right-click to display shortcut menu modes and
options.
4 Hold down Ctrl (or enter c for Copy) to retain the original image, and
specify the second point of the mirror line.
Turning on Ortho mode is often useful when mirroring objects.
5 Turn off grips by pressing Enter, Spacebar, or Esc.
644 | Chapter 18 Select and Modify Objects