2012

See also:
■ Set Options for Plotted Objects on page 1209
To apply screening to objects in a layout viewport
1 Click File menu ➤ Plot Style Manager.
2 Right-click a CTB or STB file. Click Open.
3 In the Plot Style Table Editor, Form View tab, select a plot style to change.
4 In the Screening box, enter an intensity value between 1 and 100.
5 Click Save & Close.
6 Click Output tab ➤ Plot panel ➤ Page Setup Manager.
7 In the Page Setup dialog box, Plot Device tab, select the edited plot style
table from the Plot Style Table (Pen Assignments) list.
8 Double-click within the layout viewport that contains the objects whose
screening you want to change.
9 Select the objects whose plot style you want to change.
10 Right-click in the drawing area and click Properties.
11 In the Properties palette, use one of the following methods:
■ If you are using named plot style tables, next to Plot Style, select the
plot style you edited in the Plot Style Table Editor. If that plot style
is not listed, select Other and set Active Plot Style Table to the plot
style you edited in the Plot Style Table Editor. Select the edited plot
style from the Plot Styles list in the Select Plot Style dialog box.
■ If you are using color-dependent plot style tables, next to Color, select
the color whose plot style you edited in the Plot Style Table Editor.
Quick Reference
PAGESETUP
Controls the page layout, plotting device, paper size, and other settings for
each new layout.
PROPERTIES
Controls properties of existing objects.
326 | Chapter 13 Create Multiple-View Drawing Layouts (Paper Space)