2012

4 Click to specify the opposite corner.
A new layout viewport object is available and displays a default view. To
adjust the view, double-click within the layout viewport to access model
space.
To create a viewport configuration on a layout
1 Click a layout tab.
2 Click View tab ➤ Viewports panel ➤ New.
3 In the Viewports dialog box, New Viewports tab, under standard viewports
select a viewport configuration from the list.
4 Under Setup, select either 2D or 3D.
When you select 3D, a set of standard 3D views is applied to each viewport
in the configuration.
5 Under Viewport Spacing, select the amount of spacing you want to add
between the viewports.
6 To change a view, select a viewport in the preview image. Under Change
View To, select a view from the list of standard views.
The list includes top, bottom, front, back, left, right, and isometric views,
along with any named views that are saved in the drawing. The selected
view is displayed under Preview.
7 Click OK.
8 In the drawing area, specify two points to indicate the area to contain
the viewport configuration.
To place a named viewport configuration into a layout
1 Click a layout tab.
2 Click View tab ➤ Viewports panel ➤ Named.
3 In the Viewports dialog box, Named Viewports tab, select the named
viewport configuration from the list.
4 Click OK.
5 In the layout, specify a location for the named viewport configuration.
316 | Chapter 13 Create Multiple-View Drawing Layouts (Paper Space)