2012

NOTE When you use the Zoom tool from the Full Navigation wheel or the View
Object wheel, the point in the view where you click to zoom becomes the Center
point for future Orbit operations until you either use the Zoom tool again or use
the Center tool. If you press CTRL before you click the Zoom wedge, the Center
point does not change.
Zoom Constraints
When changing the magnification of a model with the Zoom tool, you cannot
zoom in any further than the focus point or out past the extents of the model.
The direction you can zoom in and out is controlled by the center point set
by the Center tool.
When changing the magnification of a model with the Zoom tool, you cannot
zoom in any further than the focus point or out past the extents of the model.
To zoom a view with a single click
1 Display a wheel.
2 Right-click the wheel and click SteeringWheel Settings.
3 In the SteeringWheels Settings dialog box, under Zoom Tool, select Enable
Single Click Incremental Zoom.
4 Click OK.
5 Display one of the Full Navigation Wheels or the mini View Object Wheel.
6 Click the Zoom wedge.
The magnification of the model is increased and you are zoomed in closer
to the model. If you hold down the Shift key while clicking the Zoom
wedge, the model is zoomed out or you can hold down the Ctrl key to
zoom in.
7 Click Close to exit the wheel.
Navigation Tools | 273