2012

■ Double-click the anchor tab.
To dock a window or palette
1 At the top of the window or palette title bar, click the Properties button.
Click Allow Docking.
2 Click and drag the window or palette to a docking location on the right
or left side of the drawing area.
3 When the outline of the window is displayed in the docking area, release
the button.
NOTE To place a toolbar in a docking region without docking it, hold down
the Ctrl key as you drag.
To undock a window or palette
Use one of the following methods:
■ At the top of the window or palette title bar, click the Properties button.
Clear Allow Docking.
■ Double-click the double bars on the side or top of the window.
■ Position the cursor on the double bars at the top or side of the window,
hold down the left button on your pointing device, and drag the window
away from its docked location.
To turn Auto-hide on or off for a floating palette or window
■ At the top of the window or palette title bar, click the Auto-hide button.
If Auto-hide is selected, floating windows roll open and closed as the cursor
moves across them. When this option is cleared, the full window stays open
continuously.
NOTE This procedure applies to the Tool palette, DesignCenter, the Properties
palette, and several other palettes.
Specify the Behavior of Dockable Windows | 165