2012

3 In the Image dialog box, use one of the following methods to specify
insertion point, scale, or rotation:
■ Select Specify On-Screen to use the pointing device to insert the image
at the location, scale, or angle you want.
■ Clear Specify On-Screen and enter values under Insertion Point, Scale,
or Rotation.
To view the unit of measurement for the image, click Details.
4 Click OK.
Quick Reference
Commands
IMAGE
Displays the External References palette.
IMAGEATTACH
Inserts a reference to an image file.
Detach Raster Images
You can detach the reference to an image file in a drawing.
You can detach images that are no longer needed in a drawing. When you
detach an image, all instances of the image are removed from the drawing,
the image definition is purged, and the link to the image is removed. The
image file itself is not affected.
NOTE Erasing an individual instance of an image is not the same as detaching an
image. An image must be detached to remove the link from your drawing to the
image file.
To detach an image
1 Click Insert menu ➤ External References.
2 In the External References palette, right-click the image name.
3 Click Detach.
The image is no longer linked to the drawing file, and all instances of
the image are removed from the drawing.
1398 | Chapter 34 Work with Data in Other Formats