2012

what custom cabinets will look like has the manufacturer create a rendered
image of the cabinets, post it to a website, and then attach the image to the
drawing file as a URL; any design changes can be updated immediately. For
more information, see
Reference Other Drawing Files on page 1279.
To attach an image
1 Click Insert tab ➤ References panel ➤ Attach.
2 In the Select Image File dialog box, select a file name from the list or enter
the name of the image file in the File Name box. Click Open.
3 In the Image dialog box, use one of the following methods to specify
insertion point, scale, or rotation:
■ Select Specify On-Screen to use the pointing device to insert the image
at the location, scale, or angle you want.
■ Clear Specify On-Screen and enter values under Insertion Point, Scale,
or rotation.
To view the unit of measurement for the image, click Details.
4 Click OK.
To attach and scale an image file from the Internet
1 Click Insert tab ➤ References panel ➤ Attach.
2 In the Select Image File dialog box, click the Search the Web button.
3 In the Browse the Web—Open dialog box, enter the URL for the location
of the image file in Look In.
4 Enter the image file name in the File Name box. Click Open.
You can also select an image by right-clicking the image. Click Properties.
You can highlight, copy, and paste the complete image URL Address into
the File Name box.
5 In the Image dialog box, click OK.
6 If prompted, specify an insertion point and scale factor.
1396 | Chapter 34 Work with Data in Other Formats