2012

The DGN Mapping Setups dialog box is displayed when you click the Mapping
Setups button in the Import DGN Settings and Export DGN Settings dialog
boxes. You can also enter DGNMAPPING at the Command prompt.
To import a MicroStation DGN drawing
1 Click Insert tab ➤ Import panel ➤ Import.
2 In the Import File dialog box, in the Files of type box, select MicroStation
DGN (*.dgn).
3 Find and select the DGN file you want to import, or enter the name of
the DGN file at File Name.
4 Click Open.
5 In the Import DGN Settings dialog box, select a design model from the
list and specify the desired import options.
6 Click OK.
To create a new DGN mapping setup
1 In Import (or Export) DGN Settings dialog box, click Mapping Setups.
The DGN Mapping Setups dialog box is displayed.
2 Click New. The New Mapping Setup dialog box is displayed.
3 Under New DGN mapping setup name, enter a mapping setup name.
4 Under Based On, select a mapping setup. If there is no existing mapping
setup, the default is Standard.
5 Select a mapping type.
6 Click Continue. The Modify DGN Mapping Setup dialog box is displayed.
7 Specify property mapping for DGN Import (or Export).
8 Click Ok.
To rename a DGN mapping setup
1 In the DGN Mapping Setups dialog box , select the mapping setup you
want to rename.
Import MicroStation DGN Files | 1355