2012

PDFADJUST
Quick Reference
See also:
■ Adjust Underlay Contrast, Fade, Monochrome, and Colors for the
Background
Adjust the fade, contrast, and monochrome settings of a PDF underlay.
Access Methods
Button
Ribbon: PDF Underlay contextual tab ➤ Adjust panel
Summary
If you select a single PDF underlay, the default values for Fade, Contrast, and
Monochrome are the current property settings of the selected underlay. If you
select multiple underlays, the default values for Fade, Contrast, and
Monochrome remain as they were set the last time the command was used.
You can also use the
ADJUST on page 20 command to change an underlay’s
fade, contrast, and monochrome settings.
To adjust the colors for the background, open the underlay’s Properties Palette.
List of Prompts
The following prompts are displayed.
Fade Controls the fade effect of the underlay. Values range from 0 through
100. The greater the value, the lighter the linework in the underlay appears.
Works indirectly with the contrast effect; a higher contrast value blends the
underlay in the background when fade is set to a higher value.
Contrast Controls the contrast, and indirectly the fading effect, of the
underlay. Values range from 0 through 100. The greater the value, the more
each pixel is forced to its primary or secondary color. Default=75.
PDFADJUST | 931