2012

NOTE Shaded viewport plotting of rendered views is not supported.
Plot Options
Specifies options for lineweights, transparency, plot styles, shaded plots, and
the order in which objects are plotted.
Plot Object Lineweights
Specifies whether lineweights assigned to objects and layers are plotted.
Plot Transparency
Specifies whether object transparency is plotted. This option should only be
used when plotting drawings with transparent objects.
IMPORTANT For perfomance reasons, plotting transparency is disabled by default.
To plot transparent objects, check the Plot Transparency option. This setting can
be overridden by the PLOTTRANSPARENCYOVERRIDE on page 1617 system variable.
By default, the system variable honors the setting in the Page Setup and the Plot
dialog boxes.
Plot with Plot Styles
Specifies whether plot styles applied to objects and layers are plotted.
Plot Paper Space Last
Plots model space geometry first. Paper space geometry is usually plotted
before model space geometry.
Hide Paper Space Objects
Specifies whether the HIDE operation applies to objects in a paper space
viewport. This option is available only from a layout tab. This setting is
reflected in the plot preview, but not in the layout.
Drawing Orientation
Specifies the orientation of the drawing on the paper for plotters that support
landscape or portrait orientation.
Portrait
Orients and plots the drawing so that the short edge of the paper represents
the top of the page.
Landscape
Orients and plots the drawing so that the long edge of the paper represents
the top of the page.
Page Setup Dialog Box | 911