2012

List of Prompts
The following prompt is displayed.
Select array: Use an object selection method
The array type determines the remainig prompts.
For rectangular arrays:
Enter an option [
Source on page 49/REPlace on page 49/Base point on page
50/
Rows on page 50/Columns on page 50/Levels on page 50/RESet on page
51/
eXit on page 51] <eXit>:
For path arrays:
Enter an option [Source/REPlace/
Method on page 50/Base point/Items on
page 50/Rows/Levels/
Align items on page 51/Z direction on page
51/RESet/eXit] <eXit>:
For polar arrays:
Enter an option [Source/REPlace/Base point/Items/
Angle between on page
51/
Fill angle on page 51/Rows/Levels/ROTate items on page 51/RESet/eXit]
<eXit>:
Source
Activates an editing state in which you can edit the source objects (or
replacement source objects) for a selected item.
All changes (including the creation of new objects) are instantly applied to
all items that reference the same source objects.
While the editing state is active, an Edit Array contextual tab is displayed on
the ribbon and automatic saving is disabled. Save or discard changes
(ARRAYCLOSE on page 47) to exit the editing state.
When the source objects are modified, the changes are dynamically reflected
on the array block.
Replace
Replaces the source objects for selected items or for all items referencing the
original source objects.
Replacement Objects Selects the new source objects.
Base Point Specifies a base point for the replacement objects.
ARRAYEDIT | 49