2012

for the base point and press Enter at the next prompt, the objects are copied
2 units in the X direction and 3 units in the Y direction from their current
location.
Multiple
Controls whether multiple copies are created automatically as you specify
additional locations.
Array
Arranges a specified number of copies in a linear array using the first and
second copy as the spacing distance.
Number of Items to Array Specifies the number of sets of the selected objects
in the array, including the original selection set.
Second Point Determines a distance and direction for the array relative to
the base point. By default, the first copy in the array is located at the specified
displacement. The remaining copies are located in a linear array beyond that
point using the same incremental displacement.
Fit
Arranges a specified number of copies in a linear array using the first and last
copy as the total spacing distance.
Second Point Positions the last copy in the array at the specified displacement.
The other copies are fit in a linear array between the first copy and the last
copy.
NEW
Quick Reference
See also:
■ Overview of Starting a New Drawing
Creates a new drawing.
Access Methods
Button
NEW | 803