2012

Polygonal
Creates an irregularly shaped viewport using specified points.
Arc Adds arc segments to the polygonal viewport.
For a description of the options for creating arc segments, see the Arc option
in PLINE.
Close Closes the boundary. If you press Enter after specifying at least three
points, the boundary is closed automatically.
Length Draws a line segment of a specified length at the same angle as the
previous segment. If the previous segment is an arc, the new line segment is
drawn tangent to that arc segment.
Undo Removes the most recent line or arc segment added to the polygonal
viewport.
Restore
Restores viewport configurations saved with the VPORTS command.
■ Enter Viewport Configuration Name.
■ ?
First Corner Positions and sizes new viewports using the window selection
method; the viewports are fit into the selected area.
Fit Sizes the viewports to fill the drawing area.
Layer
Resets layer property overrides for the selected viewport to their global layer
properties.
■ Reset Viewport Layer Property Overrides Back To Global Properties. Enter
Y to remove all layer property overrides.
■ Select Viewports.
2
Divides the specified area horizontally or vertically into two viewports of equal
size.
■ Enter Viewport Arrangement.
796 | Chapter 13 M Commands