2012

■ Allow Bullets and Lists: When this option is selected, list formatting is applied
to all plain text in the multiline text object that looks like a list. Text that
meets the following criteria is considered to be a list. The line begins with
(1) one or more letters or numbers or a symbol, followed by (2) punctuation
after a letter or number, (3) a space created by pressing Tab, and (4) some
text before the line is ended by Enter or Shift+Enter.
When you clear the check mark, any list formatting in the multiline text
object is removed and the items are converted to plain text. Allow Auto-list
is turned off, and all the Bullets and Lists options are unavailable except
Allow Bullets and Lists.
Insert Field Displays the
Field dialog box, where you can select a field to insert
in the text.
Uppercase Changes the selected text to uppercase.
Lowercase Changes the selected text to lowercase.
Symbol Inserts a symbol or a nonbreaking space at the cursor position. You
can also insert symbols manually. See
Symbols and Special Characters on page
791.
Commonly used symbols are listed on the submenu, along with their control
code or Unicode string. Click Other to display the Character Map dialog box,
which contains the entire character set for each font available on your system.
Select a character and click Select to place it in the Characters to Copy box.
When you have selected all the characters that you want to use, click Copy
to close the dialog box. In the editor, right-click and click Paste.
Symbols are not supported in vertical text.
Oblique Angle Determines the forward or backward slant of the text. The
angle represents the offset from 90 degrees. Entering a value between -85 and
85 makes the text oblique. A positive obliquing angle slants text to the right.
A negative obliquing angle slants text to the left.
Tracking Decreases or increases the space between the selected characters.
The 1.0 setting is normal spacing. Set to more than 1.0 to increase spacing,
and set to less than 1.0 to decrease spacing.
Width Factor Widens or narrows the selected characters. The 1.0 setting
represents the normal width of the letter in this font. You can increase the
width (for example, use a width factor of 2 to double the width) or decrease
the width (for example, use a width factor of 0.5 for half the width).
772 | Chapter 13 M Commands