2012

NOTE There should be no filter (Unreconciled Layer filter) displayed when
LAYEREVALCTL = 0. If one is currently displayed, it will be turned off. You can set
the unreconciled new layers filter active and select the layers in that filter. With
the unreconciled layer selected, you can right-click and click Reconcile Layer.
Evaluate New Layers Added to Drawing
Checks for new layers that have been added to the drawing. (LAYEREVAL =
0)
Evaluate New Xref Layers Only
Checks for new layers that have been added to attached xrefs. (LAYEREVAL
= 1)
Evaluate All New Layers
Checks for new layers that have been added to the drawing, including new
layers added to attached xrefs. (LAYEREVAL = 2)
Notify when New Layers Are Present
Turns on new layer notification. (LAYERNOTIFY = 0)
Open
Displays new layer notification when new layers are present when you use
the OPEN command. (LAYERNOTIFY = 2)
Attach/Reload Xrefs
Displays new layer notification when new layers are present when you are
attaching or reloading xrefs. (LAYERNOTIFY = 4)
Restore Layer State
Displays new layer notification when you are restoring layer states.
(LAYERNOTIFY = 8)
Save
Displays new layer notification when new layers are present when you use
the SAVE command. (LAYERNOTIFY = 16)
Insert
Displays new layer notification when new layers are present when you use
the INSERT command. (LAYERNOTIFY = 32)
Display Alert for Plot When New Layers are Present
660 | Chapter 12 L Commands