2012

ISOPLANE
Quick Reference
See also:
■ Set Isometric Grid and Snap
Specifies the current isometric plane.
Access Methods
Command entry: 'isoplane for transparent use
Summary
The isometric plane affects the cursor movement keys only when Snap mode
is on and the snap style is Isometric. If the snap style is Isometric, Ortho mode
uses the appropriate axis pair even if Snap mode is off. The current isometric
plane also determines the orientation of isometric circles drawn by ELLIPSE.
You can cycle through the isometric planes by pressing Ctrl+E or F5.
List of Prompts
The following prompts are displayed.
Enter isometric plane setting [
Left/Top/Right] <Top>: Enter an option or press
Enter
Left
Selects the left-hand plane, defined by the 90-degree and 150-degree axis pair.
630 | Chapter 10 I Commands