2012

Z
Sets the Z coordinate value.
Scale
Specifies the scale for the inserted block. Specifying negative values for the X,
Y, and Z scale factors inserts a mirror image of a block.
Specify On-Screen
Specifies the scale of the block using the pointing device.
Input Scale Factor Allows you to manually enter a scale factor for the block.
X
Sets the X scale factor.
Y
Sets the Y scale factor.
Z
Sets the Z scale factor.
Uniform Scale
Specifies a single scale value for X, Y, and Z coordinates.
Rotation
Specifies the rotation angle for the inserted block in the current UCS.
Specify On-Screen
Specifies the rotation of the block using the pointing device.
Input Angle Allows you to manually enter an angle of rotation for the block.
Angle
Sets a rotation angle for the inserted block.
Block Unit
Displays information about the block units.
Unit
Specifies the INSUNITS value for the inserted block.
Insert Dialog Box | 623