2012

Summary
The position of the inserted block depends on the orientation of the UCS.
Name
Specifies the name of a block to insert, or the name of a file to insert as a block.
Browse
Opens the Select Drawing File dialog box (a standard file selection dialog box)
where you can select a block or drawing file to insert.
Path
Specifies the path to the block.
Locate Using Geographic Data
Inserts drawing using geographic data as the reference.
Specifies if the current and attached drawing contain geographic data. This
option is available only if both drawings have geographic data.
Description Displays the description that was saved with the block.
Preview
Displays a preview of the specified block to insert. A lightning bolt icon in
the lower-right corner of the preview indicates that the block is dynamic. A
icon indicates that the block is .
Insertion Point
Specifies the insertion point for the block.
Specify On-Screen
Specifies the insertion point of the block using the pointing device.
Input Coordinates Allows you to manually enter the X, Y, and Z coordinate
value for the insertion point of the block.
X
Sets the X coordinate value.
Y
Sets the Y coordinate value.
622 | Chapter 10 I Commands