2012

If Specify On-Screen is selected, you may wait until you exit the dialog box
to rotate the object with your pointing device or enter a rotation angle value
at the Command prompt.
Angle
If Specify On-Screen is cleared, enter the rotation angle value in the dialog
box. The default rotation angle is 0.
Show Details
Displays details about the selected image file.
Resolution
Displays the number of horizontal and vertical pixels per the current unit
measurement in AutoCAD LT.
Unit
Displays the current AutoCAD LT unit.
Image Size in Pixels
Displays the width and height of the raster image measured in pixels.
Image Size in Units
Displays the width and height of the raster image measured in AutoCAD LT
units.
Path
Found In Displays the path where the image file is located.
Saved Path Displays the path that is saved with the drawing when the image
file is attached. The path is dependent upon the Path Type setting.
Image Ribbon Contextual tab
Quick Reference
See also:
■ Modify Raster Images and Image Boundaries
Summary
When you select a raster image that is attached to a drawing, the Image
Contextual tab appears on the ribbon.
Image Ribbon Contextual tab | 615