2012

-GROUP
Related procedures:
■ Group Objects
Creates and manages saved sets of objects called groups.
List of Prompts
The following prompts are displayed.
Enter a group option [?—List Groups on page 542/Order on page 542/Add on
page 542/
Remove on page 542/Explode on page 542/REName on page
542/
Selectable on page 542/Create on page 543] <Create>: Enter an option or press
Enter
?—List Groups
Lists names and descriptions of groups defined in the drawing.
Order
Changes the numerical order of objects within a group. Reordering is useful
when creating tool paths. For example, you can change the cut order for the
horizontal and vertical lines of a tool path pattern.
Position Number
Reverse Order
Add
Adds objects to a group.
Remove
Removes objects from a group.
If you remove all the group's objects, the group remains defined. You can
remove the group definition from the drawing by using the Explode option.
Explode
Deletes a group definition by exploding the group into its component objects.
Rename
Assigns a new name to an existing group.
Selectable
Specifies whether a group is selectable. When a group is selectable, selecting
one object in the group selects the whole group. Objects on locked or frozen
layers are not selected.
542 | Chapter 8 G Commands