2012

Y
Sets the Y component of the world coordinate system for the geographic
location.
Z
Sets the Z component of the world coordinate system for the geographic
location.
Pick Point
Specifies the X, Y, and Z values of the Geographic Location marker based on
the World Coordinate System (WCS).
Elevation
Sets the relative height along the specified up-direction defined for a geographic
location.
North Direction
By default, north is the positive Y direction in the World Coordinate System
(WCS).
Angle
Specifies the angle from 0 for the north direction
Pick Point
Specifies the north angle based on the direction vector specified. A rubber
band line appears denoting the north direction.
Interactive North Direction Preview
Specifies the north angle. The range is 0-359.9.
Up Direction
By default, the up direction is the positive Z-axis (0,0,+1). The Up direction
and the north direction are always constrained such that they are perpendicular
to each other.
Up Direction
Sets the up direction.
Pick Point
Specifies the up direction (from the current WCS coordinate) based on the
direction vector specified.
Enabled only if the up direction is set to Custom.
534 | Chapter 8 G Commands