2012

Sets the format of the latitude and longitude representation in the drawing.
Use Map Displays the
Location Picker Dialog Box on page 535.
Specifies a location by using the pointing device.
The latitude and longitude values are updated when you select a location.
If you enter latitude and longitude values, then the map displays the updated
location.
Latitude
Sets the latitude of the current location. You can enter a value or select a
location on the map.
The valid range is -90 and +90 as a floating point number.
(
LATITUDE on page 1562 system variable).
North/South
Controls whether a positive value is north of the equator or a positive value
is south of the equator.
Longitude
Displays the longitude of the current location. You can enter a value or select
a location on the map.
The valid range is -180 to +180 as a floating point number.
(LONGITUDE on page 1573 system variable).
East/West
Controls whether a positive value is west of the Prime Meridian or a positive
value is east of the Prime Meridian.
Time Zone
Specifies the time zone. Time zones are estimated by reference to the location.
You can set the time zone directly.
TIMEZONE on page 1684 (system variable).
Coordinates and Elevation
Sets the values for the World Coordinate System (WCS), X,Y,Z, and the
elevation.
X
Sets the X component of the world coordinate system for the geographic
location.
Geographic Location Dialog Box | 533