2012

Table Of Contents

Paper Size Enter the paper size or enter ? to view a list of paper sizes defined

for the default plotter driver.

Paper Units Specify Inches or Millimeters as the paper size unit.

NOTE This prompt does not display if you are exporting a raster image, such as

a BMP or TIFF file, because the size of the plot defaults to pixels.

Drawing Orientation Specify if the output displays in portrait or landscape.

Plot Scale Specify how to scale the drawing in the DWF, DWFx, or PDF file.

■ Plotted Inches=Drawing Units: Calculates the plot scale based on the inches

or millimeters to drawing units that you specify. You can also enter a real

number as a fraction (for example, you can enter 1=2 or.5).

■ Fit: Automatically calculates the scale to fit the area on the paper size

specified earlier.

Plot with Plot Styles? Specify whether to export using the plot styles applied

to objects and defined in the plot style table.

■ Yes: If you enter Yes (plot with plot styles), enter the plot style table name,

press Enter for none or enter ? to list to view plot style tables.

■ No: If you select No, enter . at the next prompt to select none.

Plot Style Table Name All style definitions with different property

characteristics are stored in the current plot style table and can be attached

to the geometry.

Plot with Lineweights Specifies whether or not to use the lineweight

(measured in pixels) specified in the PC3 driver.

EXPORTDWF

Quick Reference