2012

or
“path name\filename.dgn”
If you enter a valid DWF file name without a file extension, the program adds
the extension and searches for the file.
Enter Name of Sheet or ? Enter a sheet name. For a list of sheets, enter ?.
Enter Sheet(s) to list <*> Lists the sheets available in the DWF file in a separate
text window.
Insertion Point Specifies the insertion point for the selected DWF file.
Scale Factor Specifies the scale factor of the selected DWF underlay and the
scale factor units.
If INSUNITS is set to “unitless” or if the underlay does not contain resolution
information, the scale factor becomes the underlay width in AutoCAD units.
If INSUNITS has a value such as millimeters, centimeters, inches, or feet, and
the underlay has resolution information, the scale factor is applied after the
true width of the underlay in AutoCAD units is determined.
Rotation Specifies the rotation angle of the selected DWF underlay by entering
an angle value at the Command prompt or by clicking onscreen.
DWFCLIP
Quick Reference
See also:
■ Clip External References and Blocks
Crops the display of a selected DWF or DWFx underlay to a specified boundary.
Access Methods
Button
Ribbon: DWF Underlay contextual tab ➤ Clipping panel ➤ Create
Clipping Boundary
Shortcut menu: Select a DWF or DWFx underlay to clip, right-click in the
drawing area, and click DWF Clip
440 | Chapter 5 D Commands