2012

Enable Pointer Input
Turns on pointer input. When pointer input and dimensional input are both
turned on, dimensional input supersedes pointer input when it is available.
(DYNMODE system variable)
Pointer Input
Displays the location of the crosshairs as coordinate values in a tooltip near
the cursor. When a command prompts you for a point, you can enter
coordinate values in the tooltip instead of in the Command window.
Preview Area
Shows an example of pointer input.
Settings
Displays the
Pointer Input Settings dialog box.
Enable Dimension Input
Turns on dimensional input. Dimensional input is not available for some
commands that prompt for a second point. (DYNMODE system variable)
Dimension Input
Displays a dimension with tooltips for distance value and angle value when
a command prompts you for a second point or a distance. The values in the
Drafting Settings Dialog Box | 425