2012

Specifies the snap spacing in the X direction. The value must be a positive real
number. (SNAPUNIT system variable)
Snap Y Spacing
Specifies the snap spacing in the Y direction. The value must be a positive real
number. (SNAPUNIT system variable)
Equal X and Y Spacing
Forces the X and Y spacing to the same values for snap spacing and for grid
spacing. The snap spacing intervals can be different from the grid spacing
intervals.
Polar Spacing
Controls the PolarSnap
™
increment distance.
Polar Distance
Sets the snap increment distance when PolarSnap is selected under Snap Type
& Style. If this value is 0, the PolarSnap distance assumes the value for Snap
X Spacing. The Polar Distance setting is used in conjunction with polar tracking
and/or object snap tracking. If neither tracking feature is enabled, the Polar
Distance setting has no effect. (POLARDIST system variable)
Snap Type
Sets the snap style and snap type.
Grid Snap
Sets the snap type to Grid. When you specify points, the cursor snaps along
vertical or horizontal grid points. (SNAPTYPE system variable)
Rectangular Snap:
Sets the snap style to standard Rectangular snap mode. When the snap type
is set to Grid snap and Snap mode is on, the cursor snaps to a rectangular snap
grid. (SNAPSTYL system variable)
Isometric Snap
Sets the snap style to Isometric snap mode. When the snap type is set to Grid
snap and Snap mode is on, the cursor snaps to an isometric snap grid.
(SNAPSTYL system variable)
PolarSnap
Sets the snap type to Polar. When Snap mode is on and you specify points
with polar tracking turned on, the cursor snaps along polar alignment angles
416 | Chapter 5 D Commands