2012

DGN column: Selecting Add Color… from the right-click menu allows you to
add a valid DGN color value to the cell. Valid colors include 0-255, ByLevel
and ByCell. The DWG column is automatically populated with the equivalent
RGB value. You can modify a DGN color by double-clicking the cell and typing
a different value.
DWG column: Selecting Add Color… from the right-click menu brings up the
Select Color dialog box on page 319. You can add ACI colors, true colors or
color from a Color Book. The DGN column is automatically populated with
the DGN equivalent color value. You can modify a DWG color by clicking
the cell and selecting an option from the drop-down list. The drop-down list
displays the standard color list as well as a list of colors previously added to
the DWG column and the Select Color option.
NOTE The AutoCAD Color Index Values are used to populate the DGN Column
on DGNEXPORT only because Microstation users can use their own color table
values which map differently. (On DGNIMPORT, you can read the DGN color
index value directly from the file).
Add Properties from DGN File
Opens the Add Properties from DGN File dialog box (a
standard file selection
dialog box
). The level and linestyle properties from the chosen DGN file are
318 | Chapter 5 D Commands