2012

-DGNIMPORT
Quick Reference
See also:
■ Import MicroStation DGN Files
If you enter -dgnimport at the Command prompt, the following prompts are
displayed.
List of Prompts
The following prompts are displayed.
Enter
filename on page 308 for DGN Import: Specify path and filename of DGN
file
Enter name of model or [
? on page 308] <Default>: Enter the name of the design
model in the DGN file, enter ? to list all design models, or press Enter
Specify conversion units on page 309 [Master/Sub] <Master>: Specify m or s, or
press Enter
Specify mapping setup on page 309 or [?] <Standard>: Specify mapping setup or
? to specify filter command
TIP Create a script using -DGNIMPORT to batch process importing of DGN files.
Filename
The file name can include up to 255 characters and contain letters, digits,
spaces, and any special characters not used by Microsoft Windows or this
program.
To avoid errors when entering a file name, it is recommended that you specify
both the DGN file and path as follows:
path\filename.dgn
or
“path\filename.dgn”
If you enter a valid DGN file name without a file extension, the program adds
the extension and search for the file.
? - List of Design Models
Lists all design models contained in the DGN file.
308 | Chapter 5 D Commands